APRSISCE/32 and
AGWPE
Configuring APRSISCE/32 to use
AGWPE is not difficult, as Steve Daniels G6UIM helped explain.
In APRSISCE/32: 1. On the top menu, select
Configure> Ports> New port.
2. In the "New RFPort"
popup window, for type use the drop down
menu to select AGW
, and give the port a name of your
choice, for example, "AGWPE VHF". Click create.
3. A "TCP/IP or Comm?"
pop up window will appear. Click on "yes"
to configure this port as a TCP/IP port.
4. In the next TCP
Configuration pop up window,
in the
IP or DNS field, type in
"localhost or 127.0.0.1" (assuming
AGWPE is running on the same computer). For Port,
enter 8000 (assuming you haven't changed
the default TCP/IP port in AGWPE, which is 8000).
5. In the next "Port
Configuration" popup you can enable or disable various options --
or just leave them set for their defaults. If you are running an Igate,
make sure RF to IS,
IS to RF, Enabled, Xmt Enable, Beacon
and Messages are all ticked.
6. Click
accept and you are done.
Return to the "Compatible
Programs" page
|